3D Printers
Revision as of 01:10, 8 April 2017 by Dvysotskiy (talk | contribs)
We have Isis3D 3D printers for use by members.
Printer status as of 4/8/2017
# | Name | Extruder 1 | Extruder 2 | Heated Bed | X Endstop | Y Endstop | Z Endstop | Bed Level | LCD | SD Reader | Auto-level | Nozzle Heights | Calibration | Notes |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Anna | ✖ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ? | ||||
2 | Natalie | ? | ✔ | ✖ | ✔ | ✔ | ✔ | ✔ | ✔ | ✖ | ||||
3 | Mary | ✔ | ✖ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | E2 just needs terminal connector to RAMBo. | ||||
4 | Sparky | ✖ | ✖ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✖ |
Printers have labels attached to them for identification
Good stuff to document in time:
- Identifying and clearing jammed extruders
- Manually leveling the bed
- Setting up a new computer for 3D printing
- Optimal Slicer settings