Difference between revisions of "Jet 14" x 40" Wood Lathe"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
|where = Wood shop | |where = Wood shop | ||
|value = $2000 | |value = $2000 | ||
| + | |[[Jet Lathe Manual.pdf]] | ||
| + | |||
}} | }} | ||
| − | = | + | == Description == |
| − | + | under construction | |
| + | |||
| + | == Safety and Certification == | ||
| + | === Hazards === | ||
| + | * under construction | ||
| + | * under construction | ||
| + | |||
| − | under construction | + | === Prohibited Operations === |
| + | * Modifying/hacking the saw and its original accessories | ||
| + | * Bypassing of saw safety features | ||
| + | |||
| + | |||
| + | === Pre-Operational Safety === | ||
| + | * Check self for loose clothing, hair and jewelry. REMOVE GLOVES. | ||
| + | * Wear safety glasses. | ||
| + | * Ensure emergency stop button is released. | ||
| + | * Clear the Lathe of extraneous objects and remove any excess dust or debris from operational parts. | ||
| + | * Make sure that Lathe parts are functioning as intended and that nothing is loose or damaged. | ||
| + | * Set up any jigs, fences and safety equipment before turning the drill on. | ||
| + | |||
| + | |||
| + | === Operational Safety === | ||
| + | * under construction. | ||
| + | * under construction | ||
| + | |||
| + | |||
| + | === Basic Operations === | ||
| + | * under construction | ||
| + | * under construction | ||
| + | ** Basic Functions: | ||
| + | *** under construction | ||
| + | ** Advanced Features: | ||
| + | *** under construction | ||
| − | = | + | === End of Operation and Clean-up === |
| − | + | * Set the Master power switch to the OFF position. | |
| + | * Remove any drill bit | ||
| + | * Remove dust from working surfaces. Clear debris around the drill area. | ||
| + | * If necessary, move drill to its home position | ||
= Certifications = | = Certifications = | ||
Revision as of 15:10, 24 May 2021
 | |
| Owner/Loaner | SSH |
|---|---|
| Serial Number | ? |
| Make/Model | Jet JWL-1440VSK 14" x 40" |
| Arrival Date | 05/01/2021 |
| Usability | yes |
| Contact | Addison Leon |
| Where | Wood shop |
| Certification Needed | yes |
| Hackable | NO |
| Estimated Value | $2000 |
| Manual/Documentation | {{{mandoc}}} |
Contents
Description
under construction
Safety and Certification
Hazards
- under construction
- under construction
Prohibited Operations
- Modifying/hacking the saw and its original accessories
- Bypassing of saw safety features
Pre-Operational Safety
- Check self for loose clothing, hair and jewelry. REMOVE GLOVES.
- Wear safety glasses.
- Ensure emergency stop button is released.
- Clear the Lathe of extraneous objects and remove any excess dust or debris from operational parts.
- Make sure that Lathe parts are functioning as intended and that nothing is loose or damaged.
- Set up any jigs, fences and safety equipment before turning the drill on.
Operational Safety
- under construction.
- under construction
Basic Operations
- under construction
- under construction
- Basic Functions:
- under construction
- Advanced Features:
- under construction
- Basic Functions:
End of Operation and Clean-up
- Set the Master power switch to the OFF position.
- Remove any drill bit
- Remove dust from working surfaces. Clear debris around the drill area.
- If necessary, move drill to its home position
Certifications
| Certifiers |
|---|
| Addison Leon |
| Certified |
|---|
| Chris Wagner |
| Erin Scanlon |
| Marissa G. |
| Andrew L. |
| Sam Milstone |
