Difference between revisions of "Jet 14" x 40" Wood Lathe"
Jump to navigation
Jump to search
Line 40: | Line 40: | ||
* Chisels | * Chisels | ||
*Important (Safety) Notes | *Important (Safety) Notes | ||
+ | [[File:AddisonLatheNotes.jpg|thumb|"LATHE notes" by Addison Leon]] | ||
=== Operational Safety === | === Operational Safety === |
Revision as of 14:13, 25 May 2021
Owner/Loaner | SSH |
---|---|
Serial Number | ? |
Make/Model | Jet JWL-1440VSK 14" x 40" |
Arrival Date | 05/01/2021 |
Usability | yes |
Contact | Addison Leon |
Where | Wood shop |
Certification Needed | yes |
Hackable | NO |
Estimated Value | $2000 |
Manual/Documentation | File: Jet_Lathe_Manual.pdf |
Contents
Description
under construction
Safety and Certification
Hazards
- under construction
- under construction
Prohibited Operations
- Modifying/hacking the saw and its original accessories
- Bypassing of saw safety features
Pre-Operational Safety
- Check self for loose clothing, hair and jewelry. REMOVE GLOVES.
- Wear safety glasses.
- Ensure emergency stop button is released.
- Clear the Lathe of extraneous objects and remove any excess dust or debris from operational parts.
- Make sure that Lathe parts are functioning as intended and that nothing is loose or damaged.
- Set up any jigs, fences and safety equipment before turning the drill on.
Addison's Lathe Notes
- Order of Operations
- Chisels
- Important (Safety) Notes
Operational Safety
- under construction.
- under construction
Basic Operations
- under construction
- under construction
- Basic Functions:
- under construction
- Advanced Features:
- under construction
- Basic Functions:
End of Operation and Clean-up
- Set the Master power switch to the OFF position.
- Remove any drill bit
- Remove dust from working surfaces. Clear debris around the drill area.
- If necessary, move drill to its home position
Certifications
Certifiers |
---|
Addison Leon |
Certified |
---|
Chris Wagner |
Erin Scanlon |
Marissa G. |
Andrew L. |
Sam Milstone |
Dan Meyer |