Jet 14" x 40" Wood Lathe
Jump to navigation
Jump to search
Owner/Loaner | SSH |
---|---|
Serial Number | ? |
Make/Model | Jet JWL-1440VSK 14" x 40" |
Arrival Date | 05/01/2021 |
Usability | yes |
Contact | Addison Leon |
Where | Wood shop |
Certification Needed | yes |
Hackable | NO |
Estimated Value | $2000 |
Manual/Documentation | File: Jet_Lathe_Manual.pdf |
Contents
Description
under construction
Safety and Certification
Hazards
- under construction
- under construction
Prohibited Operations
- Modifying/hacking the saw and its original accessories
- Bypassing of saw safety features
Pre-Operational Safety
- Check self for loose clothing, hair and jewelry. REMOVE GLOVES.
- Wear safety glasses.
- Ensure emergency stop button is released.
- Clear the Lathe of extraneous objects and remove any excess dust or debris from operational parts.
- Make sure that Lathe parts are functioning as intended and that nothing is loose or damaged.
- Set up any jigs, fences and safety equipment before turning the drill on.
Addison's Lathe Notes
- Order of operations
- Prepare stock
- Cut edges off
- Mount stock
- Face plate / 2 way chuck
- Adjust tool rest
- Tension between head / tailstock
- Set speed based on size of stock
- Rough, shape, finish
- Prepare stock
- Chisels
- Gouge
- Start with this one
- Scraper
- Finish with these
- Shapers
- Hollower
- Bowl / vessel interiors
- Gouge
- Important (Safety) Notes
- WHEN SETTING THE TOOL REST SET IT ROUGHLY IN THE MIDDLE OF YOUR STOCK WITH A FINGER TIP OF CLEARANCE BETWEEN IT AND YOUR MATERIAL
- THE LATHE IS A START AND STOP TOOL, BECAUSE YOU'RE TAKING AWAY. MATERIAL AWAY YOU WILL NEED TO ADJUST THE TOOL REST SO THAT THE GAP ISN'T TOO LARGE
- START SLOW AND SPEED UP GRADUALLY AS YOU CENTER, SHAPE, AND FINISH YOUR OBJECT
- CHIPS 3 CHUNKS WILL FLY! SAFETy GOGGLES AND A FACE SHIELD ARE SUPER NECESSARY
- ALSO IMPORTANT TAKE OFF HAND / WRIST JEWELRY & TIE HAIR BACK
- YOUR HAND WILL BE CLOSE TO THE MATERIAL & TOOLS CAN GET. HOT (ESPECIALLY WHEN THEY'RE DULL) NON-CARBIDE TOOLS CAN BE QUENCHED IN WATER.
- FOAM UNDER SANDPAPER CAN HELP
Operational Safety
- under construction.
- under construction
Basic Operations
- under construction
- under construction
- Basic Functions:
- under construction
- Advanced Features:
- under construction
- Basic Functions:
End of Operation and Clean-up
- Set the Master power switch to the OFF position.
- Remove any drill bit
- Remove dust from working surfaces. Clear debris around the drill area.
- If necessary, move drill to its home position
Certifications
Certifiers |
---|
Addison Leon |
Erin Scanlon |
Member Name | Certified By | Date |
---|---|---|
Chris Wagner | Addison Leon | 2021-05-23 |
Erin Scanlon | Addison Leon | 2021-05-23 |
Marissa G. | Addison Leon | 2021-05-23 |
Andrew L. | Addison Leon | 2021-05-23 |
Sam Milstone | Addison Leon | 2021-05-23 |
Dan Meyer | Addison Leon | 2021-05-23 |