Difference between revisions of "Network PDUs"

From sshcWiki
Jump to navigation Jump to search
m (more crap about these stupid PDUs. Formatting.)
m (Yes! No! :()
Line 8: Line 8:
 
! Name !! IP address !! MAC Address !! IP set and pinging?
 
! Name !! IP address !! MAC Address !! IP set and pinging?
 
|-
 
|-
| sshc-cgx-pdu-01 || 172.16.0.55 || 00:0d:ad:00:1a:90 || No
+
| sshc-cgx-pdu-01 || 172.16.0.55 || 00:0d:ad:00:1a:90 || Yes
 
|-
 
|-
 
| sshc-cgx-pdu-02  ||172.16.0.56  || 00:0D:AD:00:1A:94 || Yes
 
| sshc-cgx-pdu-02  ||172.16.0.56  || 00:0D:AD:00:1A:94 || Yes

Revision as of 19:55, 1 April 2015

Our Stupid Network PDUs

We have two Dataprobe IP-410 network-enabled PDUs. They are a pain. Please donate us something not terrible.

Inventory

Name IP address MAC Address IP set and pinging?
sshc-cgx-pdu-01 172.16.0.55 00:0d:ad:00:1a:90 Yes
sshc-cgx-pdu-02 172.16.0.56 00:0D:AD:00:1A:94 Yes

Setting the IP address

I couldn't figure out how to get these things to set their IP addresses in anything other than Windows.

In windows, just:

arp -s <IP address> <MAC address>

and then ping the IP address.

The IP address seems to persist through resets, though I don't know quite how "sticky" it is. It lasted at least 10 minutes for me to drop the PDU back in the cabinet.

Talking to them over TCP/IP

These things communicate over HTTP and Telnet.

I have no idea what the password is.

iPal  Version 2.3d
 Please Enter The Password >

It's not the default from the manual ("PASS")

Talking to them over RS232

"This connection provides for RS-232 connection for out-of-band connection to the iPAL. A terminal or modem can be attached directly to this 9 pin connector. With a modem attached, connection is made using PPP (Dial-up-Networking) and Telnet.

Connection directly to a laptop or terminal requires a null modem (crossover) cable.

With a terminal directly installed, a simple menu interface is used. These menus are identical to the telnet setup and control screens. Use any terminal emulation software to connect to the iPAL.

Connection parameters are: 19200bps, 8 data bits, 1 stop bit, no parity (19200,8,n,1). Set flow control to OFF."

-- Dataprobe iPal Manual


Couldn't get it to work. Systems wouldn't make a peep.

Manual

File:Ip815.pdf