Difference between revisions of "Proposal Router Table Update"
Jump to navigation
Jump to search
Line 14: | Line 14: | ||
== Proposal Text == | == Proposal Text == | ||
+ | This proposal is suggesting the following: | ||
+ | |||
+ | * Replace the lift with a lift capable of holding a motor, and operating better. | ||
+ | * Obtain a router motor [not a router] | ||
+ | * Obtain a collet reducer [1/2" to 1/4", to support existing bits] | ||
+ | * Combine the above, and drop them into the existing router table, in place of the existing toolset | ||
== Proposal Item List == | == Proposal Item List == |
Revision as of 19:54, 19 September 2018
Proposal to Replace Router Lift, Acquire Dedicated Motor | |
---|---|
Sponsors | N/A |
History | |
Posted to List | 9/19/2018 |
Officially Proposed | 9/19/2018 |
To be voted on | not set |
Results | |
not voted |
Background
Our router table was a donor. It contains a not terrible lift, and either had a router, or we put one in.
The lift is not perfect. The router is underpowered, and now the collet is both bad at holding bits, and apparently quite difficult to remove bits from.
Proposal Text
This proposal is suggesting the following:
- Replace the lift with a lift capable of holding a motor, and operating better.
- Obtain a router motor [not a router]
- Obtain a collet reducer [1/2" to 1/4", to support existing bits]
- Combine the above, and drop them into the existing router table, in place of the existing toolset
Proposal Item List
Items |
---|
Incra Mast-R Lift II |
Porter Cable variable speed router motor |
Amana Tool RB116 collet reducer [1/2 to 1/4] |
Proposal Costs
Item | Cost | Source Link |
---|---|---|
Incra Mast-R Lift II | $369.99 | Amazon |
Porter Cable variable speed router motor | $339.99 | Amazon |
Amana Tool RB116 collet reducer [1/2 to 1/4] | $6.90 | Amazon |
Total | $716.88 |