Difference between revisions of "Ryobi Oscillating Spindle Sander"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
= Changing Sanding Drums = | = Changing Sanding Drums = | ||
Loosen the nut on the top of the spindle. Remove nut and washer. The drum should slide up and you should be able to remove the sand paper tube from the drum if necessary. Add the new drum of your choosing on the spindle, add the washer back on, followed by the nut, and tighten (hand tight works well enough for the smaller diameter spindles) | Loosen the nut on the top of the spindle. Remove nut and washer. The drum should slide up and you should be able to remove the sand paper tube from the drum if necessary. Add the new drum of your choosing on the spindle, add the washer back on, followed by the nut, and tighten (hand tight works well enough for the smaller diameter spindles) | ||
| + | |||
[[File:SandingDrumNoNo.jpg|thumbnail|left|DO NOT USE A DRUM WITHOUT A WASHER]] | [[File:SandingDrumNoNo.jpg|thumbnail|left|DO NOT USE A DRUM WITHOUT A WASHER]] | ||
| − | |||
| − | [[File:SandingDrumYesYes.jpg|thumbnail|ALWAYS | + | [[File:SandingDrumYesYes.jpg|thumbnail|left|ALWAYS USE THE WASHER]] |
Revision as of 18:56, 25 August 2017
 | |
| Owner/Loaner | Nick Taluzek |
|---|---|
| Serial Number | ? |
| Make/Model | OSS450 |
| Arrival Date | 4/10/2017 |
| Usability | yes |
| Contact | ntaluzek@gmail.com |
| Where | Wood shop |
| Certification Needed | NO |
| Hackable | NO |
| Estimated Value | $50 |
| Manual/Documentation | {{{mandoc}}} |
General Info
This tool is property of Nick Taluzek but is in the space and available for members to use. There are additional sanding drums located in the drawer of the wooden workbench.
Changing Sanding Drums
Loosen the nut on the top of the spindle. Remove nut and washer. The drum should slide up and you should be able to remove the sand paper tube from the drum if necessary. Add the new drum of your choosing on the spindle, add the washer back on, followed by the nut, and tighten (hand tight works well enough for the smaller diameter spindles)
