Ryobi Oscillating Spindle Sander
General Info
This tool is property of Nick Taluzek but is in the space and available for members to use. There are additional sanding drums located in the drawer of the wooden workbench.
Changing Sanding Drums
Loosen the nut on the top of the spindle. Remove nut and washer. The drum should slide up and you should be able to remove the sand paper tube from the drum if necessary. Add the new drum of your choosing on the spindle, add the washer back on, followed by the nut, and tighten (hand tight works well enough for the smaller diameter spindles)