Turnigy 9x OpenTX Radio Controllers

From sshcWiki
Revision as of 13:16, 3 January 2021 by Dmeyer (talk | contribs)
Jump to navigation Jump to search

Turnigy 9x OpenTX Radio Controllers

We have two Turnigy 9x Radio Controls. They were hacked by the MiG (Multi-rotor interest Group) with usb connected eeprom programmers to run OpenTX firmware. The latest firmware that these radios can run is OpenTX 2.1.9 Running newer versions of OpenTX will result in corrupted Eeprom

These radios are very versatile and with their DIY-Multiprotocol-TX-Modules installed can control almost any radio controlled device on the market. Be aware that cell towers and high power 2.4ghz transmitters can severely impact control range of these radios, especially in a urban environment. Avoid flying in the beam path of cell transmitters on buildings and towers. If you do lose a control link, hold the radio high above your head to regain control and note the position of the controlled model, and avoid entering that area again.

Features:
Per opent-tx.org

  • Compatible with OpenTX 2.1 branch and earlier releases (see issue)
  • Also exist as Turnigy 9X
  • Atmega64
  • 16 models
  • 5 flight modes
  • A lot of mods supported (audio, voice, telemetry, rotary encoder navigation, ...)

Making Custom Splash Images
Format as 124x64 px 24bit bmp files. Basically black and white pixel art. Load onto radio using OpenTX 2.1 companion software. Name in this format #####.bmp do not exceed 5 characters in file name.

Information on our iRangeX IRX4 Plus STM32 DIY-Multiprotocol-TX-Module

Retrieved from "https://wiki.sshchicago.org/index.php?title=Turnigy_9x_OpenTX_Radio_Controllers&oldid=1760"